Christiaan Bradley Surfboard Solution
Tax included.
Shipping calculated at checkout.
Best for
Wave Size
Surfer Ability
WAVE TYPE
TECHNOLOGY
PU Tech
Christiaan Bradley Surfboard Solution
Taken from a high performance shape that was tested by pros we added volume where we could. Its a wide point forward style allrounder. Suited to capable surfers those maybe lacking fitness and unable to surf every week. Loads of drive and hold and maintains speed with minimal effort. This board is designed for older experienced surfers so the dimensions represent this. If you have one board this would be it. Classic 80's style beak nose to bring volume forward. Volume under chest and back underfoot make this board very user friendly. Great allrounder and perfect for a one board surf trip.
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'8 | 18 3/4 | 2 3/8 | 26.9L |
| 5'9 | 18 7/8 | 2 7/16 | 28.1L |
| 5'10 | 19 | 2 1/2 | 29.5L |
| 5'11 | 19 1/4 | 2 9/16 | 31.1L |
| 6'0 | 19 1/2 | 2 5/8 | 32.6L |
| 6'1 | 19 3/4 | 2 11/16 | 34.2L |
| 6'2 | 20 | 2 3/4 | 35.8L |
| 6'3 | 20 1/4 | 2 3/4 | 36.8L |
| 6'4 | 20 1/2 | 2 3/4 | 37.8 |
| 6'6 | 20 3/4 | 2 7/8 | 41L |
| 6'8 | 21 | 2 15/16 | 43.7L |
| 6'10 | 21 1/4 | 1/4 3 | 46.1L |
| 7'0 | 21 1/2 | 1/2 3 | 47.9L |
Christiaan Bradley Surfboard Solution Specs
Bottom Contour
Moderate single through to very slight double concave
Rocket
Performance rocker for modern turns
Rails
Medium full performance rail, refined through tail area for hold with speed
Outline
Slightly fuller outline but keeping a regular shortboard look for performance
Fins
Futures or FCS thruster positioned for controlled surfing
PU CONSTRUCTION
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.
