Onya (narrow)
The Onya by Bradley is for ripping waves. Small waves, medium waves or good waves, the Onya will get you in early and carry you over those dead sections. Read More
Tax included.
Shipping calculated at checkout.
Dimension: 5'7" x 18 7/8" x 2 1/4" 25.00 L
5'7" x 18 7/8" x 2 1/4" 25.00 L
Fin Options:
Best for
Wave Size
Surfer Ability
WAVE TYPE
TECHNOLOGY
PU Tech
Onya (narrow)
The Onya by Bradley is for ripping waves. Small waves, medium waves or good waves, the Onya will get you in early and carry you over those dead sections. When that lip arrives that needs hitting the Onya will put you there. A full bodied board with a rocker design that 's the ultimate for weak surf but still rips when its good. A board that you can count on as a complete "allrounder". Available in squash, round and swallow tail.
| Length | Width | Thickness | Volume |
|---|---|---|---|
| Default | Title | Title |
Onya (narrow) Specs
Bottom Contour
Shallow to slight double concave through the fin area. Shallower concave limits stickiness in weak surf.
Rocket
Medium straight entry to flatter exit. Drive, reactivity, maintained speed.
Rails
Slightly fuller, rounded. For added float/glide through turns in mushy conditions.
Outline
Wider nose and tail.
Fins
Futures or FCS thruster positioned for controlled surfing.
PU CONSTRUCTION
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.
