Sharpeye Surfboard Inferno FT
The Inferno FT ( Limited Edition ) from SharpEye Surfboards delivers you the world’s fastest surfboard with unparalleled acceleration, speed and flow. Read More
Tax included.
Shipping calculated at checkout.
Best for
Wave Size
Surfer Ability
WAVE TYPE
TECHNOLOGY
PU Tech
Sharpeye Surfboard Inferno FT
The Inferno FT (Limited Edition) from SharpEye Surfboards delivers you the world’s fastest surfboard with Unparalleled Acceleration, Speed and Flow.
An evolution of the Inferno 72, the Inferno FT features a Quad fin design with a medium single concave that runs into a deep double concave between the fins that flows into a flat exit through the tail. This bottom contour, combined with the same proven rocker from the Inferno 72, allows electric performance in a vast range of wave types and sizes.
Looking for Unparalleled Acceleration, Speed and Flow, choose the Inferno FT.
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'8 | 19.00 | 2.44 26.5L | 26.5L |
| 5'8 | 18.75 | 2.38 25.5L | 25.5L |
| 5'9 | 19.25 | 2.50 27.9L | 27.9L |
| 5'9 | 18.75 | 2.44 26.5L | 26.5L |
| 5'10 | 19.00 | 2.50 28L | 28L |
| 5'10 | 19.25 | 2.63 29.7L | 29.7L |
| 5'11 | 19.25 | 2.50 28.7L | 28.7L |
| 5'11 | 19.50 | 2.63 30.5L | 30.5L |
| 6'0 | 19.75 | 2.63 31.4L | 31.4L |
| 6'0 | 19.38 | 2.63 30.8L | 30.8L |
| 6'1 | 20.00 | 2.63 32.2L | 32.2L |
| 6'1 | 19.50 | 2.63 31.4L | 31.4L |
| 6'2 | 20.25 | 2.63 33.1L | 33.1L |
| 6'2 | 19.63 | 2.63 32.1L | 32.1L |
Sharpeye Surfboard Inferno FT Specs
Bottom Contour
Single to Double Concave to Flat through tail exit
Rocket
Medium entry and exit rocker
Rails
Medium
Outline
Fins
Quad
PU CONSTRUCTION
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.
