The #77 model is Filipe Toledo’s board of choice during his incredible run through J-Bay in 2017, 2018 and 2019. Read More
The #77 model is Filipe Toledo’s board of choice during his incredible run through J-Bay in 2017, 2018 and 2019. The #77 has more entry and exit rocker then his previous Holy Toledo model, coupled with a harder edge above the fins and more subtle concave through the tail.
Quoted, "The fastest board I've ever ridden” by Filipe. This board surfs best in good punchy waves and is recommended for intermediate to experienced surfers only. Order the model the same length as your height.
|5'10||19 1/4||2 7/16||27.7L|
|6'0||19 5/8||2 9/16||30.2L|
Full entry and exit rocker for tight turning radius & manoeuvrability
Low rails for sharp and sensitiveness
Thruster Futures or FCS2 for ripping
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.