With no further ado, it's our pleasure to introduce you to the all-new 2BU by Phil Grace. A twin like no other on the market. Read More
PU Tech
With no further ado, it's our pleasure to introduce you to the all-new 2BU by Phil Grace. A twin like no other on the market. Following the incredible and never-ending success of the Demibu, the 2BU nose width has been reduced (by 1/4 of an inch in comparison to the Demibu) for a better entry in good waves. The twin setup has resulted in a board with maximum volume that will be unrivalled for turning potential and lighting speed down the line. 2BU or not 2BU will be the question you now need to be answering!
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 6'4 | 20 3/4 | 2 5/8 | 39.1L |
| 6'6 | 21 | 2 3/4 | 42.6L |
| 6'8 | 21 1/4 | 2 3/4 | 44.4L |
| 6'10 | 21 1/2 | 2 7/8 | 48L |
| 7'0 | 21 5/8 | 2 7/8 | 49.5L |
| 7'2 | 21 3/4 | 3/4 3 | 53.4L |
| 7'4 | 22 | 3 55.4L | 55.4L |
| 7'6 | 22 | 3 56.9L | 56.9L |
Double concave vee
Flat rocker
Down rails rear, front down and rolled
Retro wide nose, standard rear
Twin
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.
