Following the raging sucess of the One Bad Egg Mark has designed the Caviar. The Caviar is the reduced length version of the One Bad Egg and incorporating a Fish tail. Read More
Following the raging sucess of the One Bad Egg Mark has designed the Caviar. The Caviar is the reduced length version of the One Bad Egg and incorporating a Fish tail. This board will cover any conditions up to 6 foot and with its amazing paddling speed will get you into any wave you want. Incredible drive and ease at turning this board needs to be drunk with Champagne not Vodka.
|5'10||20 1/4||2 5/8||34.3L|
|5'6||19 3/4||2 1/2||30.1L|
|6'0||20 1/2||2 11/16||36.8L|
|6'4||21 1/2||2 7/8||43.3L|
Single into double concave
Super soft front into performance rear rails
Full nose with wide swallow tail
Futures or FCS thruster
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.