The Disco Inferno is a proven contest machine. It is a favourite of the whole Sharpeye team and has claimed multiple WQS victories during the models development. Read More
The Disco Inferno is a proven contest machine. It is a favourite of the whole Sharpeye team and has claimed multiple WQS victories during the models development. The Inferno is a step up from the original Disco model, with added rocker throughout along with more hold and drive.
It is a performance surfboard that will handle just about all conditions thrown at it and maintain its spark. Perfect for the WQS warrior or your local shredder.
|5'4||18 1/4||2 1/4||22.1L|
|5'5||18 3/8||2 5/16||23.4L|
|5'6||18 1/2||2 3/8||24.2L|
|5'7||18 5/8||2 3/8||24.8L|
|5'8||18 3/4||2 3/8||25.3L|
|5'9||18 3/4||2 7/16||26.4L|
|5'9||19 1/4||2 1/2||27.9L|
|5'11||19 1/4||2 1/2||28.8L|
|5'11||19 1/2||2 1/2||29.2L|
|6'0||19 3/8||2 5/8||30.5L|
|6'0||19 3/4||2 5/8||31.5L|
|6'1||19 1/2||2 5/8||31.2L|
|6'2||19 5/8||2 5/8||32.4L|
|6'2||20 1/4||2 5/8||33.4L|
|6'3||19 11/16||2 5/8||33L|
|6'3||20 1/2||2 11/16||34.5L|
|6'4||19 3/4||2 11/16||34.1L|
|6'4||20 5/8||2 3/4||36.3L|
Single to double concave to generate speed in flatter sections.
Medium entry rocker for instant speed and easy planing, flat exit rocker to hold turns and maintain speed.
Neutral medium rails for an all round surfing.
Performance nose with squash tail. A surfboard that will handle just about all conditions thrown at it and maintain its spark.
Thruster Futures or FCS2 for ripping.
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.