Tax included. Shipping calculated at checkout.
Out of stock

Best for

Wave Size

- Medium Wave

Surfer Ability

- Beginner Level - Intermediate Level - Advanced Level - Elite Level


- Powerful Wave


PU Tech


The Humpback by Mark Phipps is about redefining what we imagine a high performance longboard can be. Low volume with thinner refined rails and a thinner nose and tail. The Humpback is the opposite of your heavy cruisy log. Wide nose and single concave with a flipped beak (uplifted nose rocker) Mark added a rolled V from the middle of the board down to the tail. A rounded squaretail and setup with a 2 + 1 (box). The Humpback is an amazingly easy board to ride, easy to carve and surprisingly elegant for nose rides. If your hair isn't long and you are lightweight this board is for you!

Length Width Thickness Volume
9.0 21 3/4 2 7/8 62.11L
9.1 21 7/8 2 15/16 64.2L
9.2 22 3 66.33L 66.33L
9.3 22 1/8 3 1/16 68.66L
9.4 22 1/4 3 1/8 71L

Some Specs

Bottom Contour

Nose scoop into rolled V


Long flowing rocker


Low rails


Very wide nose with rounded square tail


2+1 with Futures or FCS side fins


PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page


WHT / 9.0 21 3/4 2 7/8 62.11L / Default
WHT / 9.0 21 3/4 2 7/8 62.11L / Default