Tax included. Shipping calculated at checkout.
Out of stock

Best for

Wave Size

- Medium Wave - Overhead Wave

Surfer Ability

- Intermediate Level - Advanced Level - Elite Level


- Steep Wave - Powerful Wave


PU Tech


Leonardo's everyday high performance shortboard. The nose rocker has been dropped slightly and run into a flatter belly rocker for typical beach breaks that can be hollow or full on the same wave. The flatter belly allows the board to run on the flats but the tail flip on this model allows for radical tight turns with control when you drop that explosive turn. The LF is a full high performance shape ridden by some of the worlds best. Leonardo's standard dimensions are 5'11 1/2 18 7/8 2 3/8 for 181 cm and 80kg.

Length Width Thickness Volume
5'7 18 2 1/8 22.4L
5'8 18 3/8 2 3/16 23.9L
5'9 18 1/2 2 1/4 25.1L
5'10 18 5/8 2 1/4 25.7L
5'11 18 3/4 2 5/16 26.8L
6'0 18 7/8 2 5/16 27.8L
6'1 19 2 3/8 29L
6'2 19 1/8 2 3/8 29.8L
6'3 19 1/4 2 7/16 31.3L
6'4 19 3/8 3/8 2 32.6L
6'5 33.6L 33.6L
6'6 34.2L 34.2L

Some Specs

Bottom Contour

Single through to slight double concave, flat flip for turn control


Lower front rocker to flatter belly late tail flip for progressive turns in punchy conditions


Rails are medium volume performance style


Standard with squash tail and single to slight double concave. The squash being slightly rounded allows easier turning with control


Futures or FCS thruster positioned for controlled surfing


PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.

Based on 1 review Write a review
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page


5'7 18 2 1/8 22.4L / FUTURES
5'7 18 2 1/8 22.4L / FUTURES