Based on 6 reviews
Write a review
Best for
Wave Size
Surfer Ability
WAVE TYPE
TECHNOLOGY
PU Tech
One Bad Egg
The One Bad Egg by Phipps is a Hipsters delight. Clean lines of a performance egg with low rails and slight concave to V bottom.
This board is amazing in big overhead surf with incredible paddle power and drive. Perfect in waist high waves when looking for comfort and turning power. Undoubtedly the BEST egg on the market in the world today.
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 6'4 | 20 | 2 5/8 | 36.8L |
| 6'6 | 20 | 2 5/8 | 37.6L |
| 6'8 | 20 1/4 | 2 5/8 | 39.15L |
| 6'10 | 20 1/2 | 2 3/4 | 42.5L |
| 7'0 | 20 1/2 | 2 3/4 | 43.8L |
| 7'2 | 20 5/8 | 2 3/4 | 45.2L |
| 7'4 | 20 3/4 | 2 3/4 | 46L |
| 7'6 | 20 3/4 | 2 7/8 | 49.2L |
| 7'8 | 20 7/8 | 2 7/8 | 50.7L |
| 7'10 | 21 | 2 7/8 | 51.8L |
| 8'0 | 21 | 2 7/8 | 52.9L |
| 8'2 | 21 1/4 | 1/4 3 | 57.1L |
| 8'4 | 21 1/4 | 1/4 3 | 58.45L |
| 8'6 | 21 1/2 | 1/2 3 | 59.9L |
| 8'8 | 21 3/4 | 3 1/16 | 63.1L |
| 8'10 | 21 3/4 | 3 1/8 | 65L |
| WIDE | VERSION | 6’0 21 | 37.6L |
| WIDE | VERSION | 6’2 21 | 39.4L |
| WIDE | VERSION | 21 1/2 | 42.5L |
| WIDE | VERSION | 21 1/2 | 43.8L |
| WIDE | VERSION | 6’8 21 | 44.9L |
| WIDE | VERSION | 21 1/4 | 49.2L |
| WIDE | VERSION | 21 1/2 | 53L |
| WIDE | VERSION | 21 3/4 | 56.9L |
| WIDE | VERSION | 8’0 22 | 61L |
| WIDE | VERSION | 22 1/4 | 65.6L |
| WIDE | VERSION | 22 1/2 | 70.2L |
Some Specs
Bottom Contour
Single into double concave
Rocket
Long even rocker
Rails
Super soft front into performance rear
Outline
Full nose with round tail
Fins
2+1 with Futures or FCS side fins for all round performance. Single fin for soul surfing
PU CONSTRUCTION
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.
