The Grunt gun has been developed over 10 years with a lot of hard chargers. The basics we have worked on over the years are: 1) ease of getting into a big one. 2) Hold and drive, especially off the bottom. 3) Refinement of volumes both in profile and rail shape. 4) The outline for control in big surf. I think we have nailed it in the Grunt and Grunt XL models. Remember, this is a very serious board for experienced surfers only.
|8.6||20 1/4||2 7/8||52.1L|
|8.0||19 3/4||2 7/8||46.8L|
|9.0||20 3/4||3/4 3||58.4L|
|7.9||19 5/8||2 3/4||43.4L|
|9.6||21 1/4||3 1/8||66.5L|
|7.6||19 1/2||2 3/4||41.3L|
V - flat with subtle concave rear
Gun rocker for maximum paddling power and control
Down shaped rail for hold
Full gun shape
Futures and FCS quad and thrusters ups for control at speed
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.