MAGURO It means, “blue fin tuna” in Japanese. One of the fastest fish in the ocean. This is our latest small wave design following the modern 2 concept. The Maguro was designed as a mix between the classic San Diego fish and a modern twin. The tail is a classic swallow (split tail) with 5” deep and 10” wide.
This characteristic creates a sharp turning tail with a good amount of drive and hold. The bottom is a classic vee all the way to the tail; the deck is flat with a modern soft rail; the rocker/ foil combo was improved if compared with the traditional 70’s fish to allow the surfer to carve classic lines or to rip like a high performance small wave design. The Maguro was designed in two versions., The classic twin keel or as a quad. It should be ridden 3 to 4 inches smaller than your height.
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.