Super Twin


Tax included. Shipping calculated at checkout.
Out of stock

Best for

Wave Size

- Medium Wave

Surfer Ability

- Intermediate Level - Advanced Level - Elite Level


- Steep Wave - Powerful Wave


PU Tech

Super Twin

The Super Twin is the most popular and versatile model in MR's range. It is the ultimate small wave high-performance board and the model MR chooses to ride most of the time. It is fast, loose and really easy to turn. With a single to double concave bottom for speed and a wider template with more nose area for floatation and paddling power. Kelly Slater, Martin Potter, Luke Egan, Julian Wilson, Tom Carroll, Titus Kinimaka, Brian Keaulana, Mick Fanning and Sunny Garcia all have Mr Super Twins in their board quivers.

Length Width Thickness Volume
5.8 19 1/4 2 3/8 27L
5.10 19 3/4 2 1/2 29.5L
6.0 20 2 1/2 30.9L
6.2 20 1/4 2 5/8 33.7L
6.4 20 1/2 2 5/8 35.2L
6.6 20 3/4 2 3/4 38.6L
6.8 21 2 3/4 40.2L

Some Specs

Bottom Contour

Single to double concave


Medium rocker


Fairly low rails


Wider template with more nose area for floatation and paddling power, original winged swallow tail


Could be use as a twin fin, twin fin with a small rear stabiliser or twin fin with a larger stabiliser


PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page

Super Twin

WHT / 5.8 19 1/4 2 3/8 27L / FCS II
WHT / 5.8 19 1/4 2 3/8 27L / FCS II