The MP twin was born from the need for speed and freedom. This board will turn faster than any board you have ever ridden. It will give you a turning arc on even the smallest of waves. When the waves get good it will just get better, bring back the off the tops from yesterday with today's flair and precision.
|5'10||20 1/4||2 9/16||31.8L|
|5'6||19 1/2||2 3/8||27L|
|5'8||19 3/4||2 1/2||29.5L|
|6'0||20 1/2||2 5/8||34.6L|
|6'4||21 1/2||2 7/8||42L|
Single into double concave
Swallow tail with wing and wider nose than a thruster
Fins plugs are set for riding as a twin, 2+1 or thruster
PU construction by Euroglass. The “P” gets its name from both the resin and the foam: polyester resin and the “U” comes from polyurethane foam . PU is the traditional surfboard construction since foam core surfboards were invented. It is still the most widely used construction method today. PU is often incorrectly referred to as “fiberglass” construction – the reason this is incorrect is because the same exact fiberglass cloth is used in both PU and Epoxy construction types, it’s the foam core and resin that soaks into the fiberglass cloth (and foam) that differ. While PU construction is generally slightly heavier and isn’t quite as strong as Epoxy construction, it tends to have a more reliable and predictable feeling whilst surfing. This is due primarily to a slower flex pattern and denser foam than epoxy construction, which basically causes less “surprises” and more predictability while surfing, especially when making hard or sharp turns. PU construction tends to be more naturally conducive to color work, especially translucent resin tints. PU is also a bit less sensitive to water infiltration and heat than epoxy construction.